Emmebi
gun cases for shotguns, italian handcraft
Gun Cases for Shotguns
Universal: for Side-by-side and Over-and-Under       With a set of barrels
These cases fit almost all the side-by-side and over-and-under shotguns with single barrel set, with following features: 12ga (we can supply also adapters or cases for other calibers); english and pistol grip stock, total max. length 54 cm; barrels from 67 to 81 cm. All cases are supplied with a 5 cm removable spacer block, to accommodate shorter barrels, and come with an extra piece of lining to make small blocks for the exact fit. Guns and accessories shown in the cases are not included. On request we can manufacture cases with special sizes and special configurations inside.

  MODEL VP/82L

 

MEASURES - DESCRIPTION




The VP range is designed to perform in style at a reasonable price.
2 plastic latches, 2 combination locks and 3 strong brass hinges -fitted with screws- assure maximum durability and lasting usage.
There are also two holes besides the handle, to fit two padlocks.

It has a high-density foam interior that protects the gun from getting damaged. Fits side-by-side and over-and-under with barrels up to 80 cm. Inside dimensions: cm 81x27.

Available also the basic version, without combination locks (just 4 plastic latches), mod. VP/82



  MODEL VP/84

 

MEASURES - DESCRIPTION




This is the top version of the VP range, designed to perform in style at a reasonable price.

2 plastic latches, 2 combination locks and 3 strong brass hinges assure maximum durability and lasting usage.
There are also two holes besides the handle, to fit two padlocks.

It has a shaped interior, with high-density foam padding -lined with velvet- that protects the gun from getting damaged.
Fits side-by-side and over-and-under with barrels up to 80 cm.
Accessories compartment, that can take also a scope for rifled shotguns.





  MODEL AG/81

 

MEASURES - DESCRIPTION



This case is designed for transportation of shotguns in critical conditions, when an additional protection is required.

It’s completely covered of bush-hammered aluminium, joined to a plywood panel (for the best ratio between lightness, sturdiness and elasticity), fitted with iron corners and fittings, as well as resistant key locks.

The interior is padded with pre-punched grey foam-rubber, that allows you to make -if necessary-compartments for your gun and accessories, guaranteeing a good protection and allowing you to fit different guns, such as side-by-side, over-and-under.

Ideal for travelling by air.

  MODEL AG/LR

  MEASURES - DESCRIPTION


This case is designed for transportation of shotguns in critical conditions, when an additional protection is required.

It’s completely covered of bush-hammered aluminium, joined to a plywood panel (for the best ratio between lightness, sturdiness and elasticity), fitted with iron corners and fittings, as well as resistant key locks.

The interior is padded with a gun-shaped grey foam-rubber, guaranteeing a good protection and allowing you to fit different guns, such as side-by-side, over-and-under, with their accessories.

Ideal for travelling by air.

  MODEL 334/U10

  MEASURES - DESCRIPTION

This case is covered with brown Eles leatherette: it is a waterproof tear-resistance fabric, featuring a soft touch as well as a nice look.

The case has reinforced handstitched edges and a soft handle to carry it comfortably.
The 3 digit combination locks are made of brass and ensure a quick and safe fastening.

The interior is finely lined with velvet, properly fitted to take in their compartments stock, barrels of side-by-side or over-and-under (up to 72 cm, but with reducer for 67 cm barrels).
The lid and stock compartments have protective foam-rubber padding, for a better protection of your gun.

There are also compartments for snap caps, brushes, chockes, accessories, and so on.


Available also for shotguns with 77 cm barrels, Mod. 334/U11.
  MODEL 355/U01

  MEASURES - DESCRIPTION



This case is covered with green Spalmato - the natural evolution of the leatherette – it is a waterproof tear-resistance fabric, featuring a soft touch as well as a nice look.

The case has reinforced edges with reddish brown leatherette and a soft handle to carry it comfortably.
The 3 digit combination locks are made of brass and ensure a quick and safe fastening.

The interior is finely lined with green velvet, properly fitted to take in their compartments stock, barrels of side-by-side or over-and-under (up to 72 cm, but with reducer for 67 cm barrels), all fastened by safe straps.

The lid and stock compartment have protective foam-rubber padding, for a better protection of your gun. There are also compartments for snap caps, oil bottle, cleaning rods. There is also a handy compartment with lid, to fit brushes, chockes, accessories, and so on.


Available also for shotguns with 77 cm barrels, Mod. 355/U04.
  MODEL 365/U04

  MEASURES - DESCRIPTION



This traditional case is built on a solid hardwood frame, covered with heavy duty green Panama canvas.

The corners and the loops are made of full grain Premium leather, and are carefully hand stitched to the frame by a waxed yellow thread. The ergonomic handle is made of leather and is fixed to the case by traditional solid brass rings.
The classic solid brass key lock is right under the handle, and together with the two leather straps ensure a safe fastening of the case.

The interior is finely lined with genuine baize green felt.
There are compartments for stock (hold by a leather strap), over-and-under or side-by-side barrels up to 77 cm (there’s a reducer for 72 cm barrels), snap caps, oil bottle, cleaning rods.
There’s also a handy compartment with lid, to fit small accessories, such as brushes, chockes, keys, and so on.

Available also for shotguns with 71 cm barrels, Mod. 365/U01.

  MODEL 400/U01

  MEASURES - DESCRIPTION


This case is fully covered with Suprema leather and features a clean and elegant shape.
The corners are carefully handstitched by a waxed yellow thread. The soft leather handle allows a comfortable carry. The three digit combination locks and the fittings are solid brass, and allow a safe and quick fastening.
A leather strap complete the external part and ensures the safe closure of the case.

The interior is finely lined with velvet, properly fitted to take in their compartments stock, barrels of side-by-side or over-and-under (up to 72 cm, but with reducer for 67 cm barrels).
The lid and stock compartment have protective foam-rubber padding, for a better protection of your gun. There are also compartments for snap caps, oil bottle, cleaning rods.
There is also a handy compartment with lid, to fit brushes, chockes, accessories, and so on.

Colours available: tan leather with burgundy velvet; redish brown leather with green velvet.

Available also for shotgun with 77 cm barrels (reducer for 72 cm barrels is supplied), Mod. 400/U04.

  MODEL 407/U04

  MEASURES - DESCRIPTION


This classic gun case is made of selected genuine Suprema leather.
Built on a hardwood frame, this case features attention to detail and a classic timeless style.
Each shell is carefully hand finished and prepared to hand-sew through the wood (with waxed thread) the corner pieces. The soft leather handle allows a comfortable carry. All the fittings are solid brass, with satin finish, and the combination lock is under the handle. Two leather straps ensure a safe fastening of the case.

The interior is finely lined with velvet, with compartments for stock, barrels of side-by-side or over-and-under up to 77 cm (a reducer for 72 cm barrels is supplied), snap caps, oil bottle, cleaning rods. There’s also a handy compartment with lid, to store other accessories, such as screwdrivers, rod brushes and so on. This case is a proper way to carry a fine gun, but it is also an excellent way to display it: if fitted with the classic gun accessories, it enhances the gun to a high level.
Colours available: tan leather with burgundy velvet; redish brown leather with green velvet; dark brown leather with green velvet.

Available also for shotgun with 72 cm barrels, Mod. 407/U01.

  MODEL 408/U04

  MEASURES - DESCRIPTION

This classic gun case is made of selected genuine full grain Premium leather.
Built on a superior construction hardwood frame, this case features an obsessive attention to detail and a classic timeless style.
Each shell is carefully hand finished and prepared to hand-sew through the wood (with waxed thread) the corner pieces, the loops and the handle attachments. The soft leather handle allows a comfortable carry. All the fittings are solid brass, with satin finish, and the classic key lock is under the handle. Two leather straps ensure a safe fastening of the case.

The interior is finely lined with genuine baize felt, with compartments for stock, barrels of side-by-side or over-and-under (up to 77 cm, but with reducer for 72 cm barrels), snap caps, oil bottle, cleaning rods, There’s also a handy compartment with lid, to store other accessories, such as screwdrivers, rod brushes and so on.
This case is a proper way to carry a fine gun, but it is also an excellent way to display it: if fitted with the classic gun accessories, it enhances the gun to a high level.
Colours available: tan leather with burgundy baize; redish brown leather with green baize; dark brown leather with burgundy baize.

Available also for shotgun with 72 cm barrels, Mod. 408/U01.
  MODEL 450/U01

  MEASURES - DESCRIPTION

This classic gun case is made of a unique mix of suede Alce leather and Suprema calfskin leather.
Built on a superior construction hardwood frame, this case features attention to detail and a classic timeless style. Each shell is carefully hand finished and prepared to hand-sew through the wood (with waxed thread) the corner pieces. The soft leather handle allows a comfortable carry. All the fittings are solid brass, with satin finish, and the three digit combination lock is under the handle. Two leather straps ensure a safe fastening of the case.

The interior is finely lined with velvet, with compartments for stock, barrels (side-by-side or over-and-under) up to 72 cm (a reducer for 67 cm barrels is supplied), snap caps, oil bottle, cleaning rods. There’s also a handy compartment with lid, to store other accessories, such as screwdrivers, rod brushes and so on.
This case is a proper way to carry a fine gun, but it is also an excellent way to display it: if fitted with the classic gun accessories, it enhances the gun to a high level. Colours available: ligth brown leather with green velvet; dark brown leather with green velvet.

Available also for shotgun with 77 cm barrels, Mod. 450/U04.
  MODEL 1000/U04

  MEASURES - DESCRIPTION


This case is designed to carry and display the very best guns.
Built on a superior construction, seasoned oak frame, each shell is carefully hand finished and then it is covered with a full grain cowhide Premium leather. It features an obsessive attention to detail and a classic, timeless style. Key locks, corners, handle attachments are solid brass with glossy finishing.
The soft leather handle allows a comfortable carry. Two strong leather straps ensure a safe fastening of the case.

The interior is finely lined with genuine baize felt, with compartments for stock, barrels of side-by-side or over-and-under up to 77 cm (a reducer for 72 cm barrels is supplied), snap caps, oil bottle, cleaning rods. There’s also a handy compartment with lid, to store other accessories, such as screwdrivers, rod brushes and so on.

This case is a proper way to carry a fine gun, but it is also an excellent way to display it: if fitted with the classic gun accessories, it enhances the gun to a high level. It comes with a very heavy canvas cover with leather corners and piping, to protect the case during transit.

Colours available: tan leather with burgundy baize; redish brown leather with green baize; dark brown leather with burgundy baize.

Available also for shotgun with 72 cm barrels, Mod. 1000/U01.
  MODEL 1003/U04

  MEASURES - DESCRIPTION


This case is designed to carry and display the very best guns.
Built on a superior construction, seasoned oak frame, each shell is carefully hand finished and then it is covered with a full grain cowhide Premium leather. It features an obsessive attention to details and a classic, timeless style. Key locks, corners, handle attachments are solid brass with glossy finishing.
The soft leather handle allows a comfortable carry. Two strong leather straps ensure a safe fastening of the case during transit.

The interior is made of oak wood as well, and finely lined with genuine baize felt, with compartments for stock, barrels of side-by-side or over-and-under up to 77 cm (a reducer for 72 cm barrels is supplied), snap caps, oil bottle, cleaning rods.
There’s also a handy compartment with lid, to store other accessories, such as Gunsmith's screwdrivers, rod brushes and so on. This case is a proper way to carry a fine gun, but it is also an excellent way to display it: if fitted with the classic gun accessories, it enhances the gun to a high level. It comes with a very heavy canvas cover with leather corners and piping, to protect the case during transit.

Colours available: tan leather with blue baize; redish brown leather with blue baize; dark brown leather with blue baize.

Available also for shotgun with 72 cm barrels, Mod. 1003/U01.
  MODEL AG/M

 

MEASURES - DESCRIPTION

This compact motor-case is designed for transportation of shotguns in critical conditions, when an additional protection is required. It is completely covered of bush-hammered aluminium, joined to a plywood panel (for the best ratio between lightness, sturdiness and elasticity), assembled with iron corners and fittings, as well as resistant key locks and hinges.

The interior is finely lined with black velvet.
There are compartments for stock, barrels (side-by-side or over-and-under) up to 77 cm (a reducer for 72 cm is supplied with the case), and accessories, such as chockes, rods and brushes, keys, screwdrivers.

Compact case, ideal for travelling by air.

  MODEL 365/UM04

  MEASURES - DESCRIPTION


This traditional motor-case is built on a hardwood frame, covered with heavy duty green Panama canvas. The corners and the loops are made of full grain Premium leather, and are carefully hand stitched to the frame by a waxed yellow thread. The ergonomic handle is made of leather and is fixed to the case by traditional solid brass rings. The classic solid brass key lock is in the middle, and together with the two leather straps ensure a safe fastening of the case. The interior is finely lined with genuine baize green felt. There are compartments for stock (hold by a leather strap), over-and-under or side-by-side barrels up to 77 cm (there’s a reducer for 72 cm barrels), cleaning rods. There’s also a handy compartment with lid, to fit small accessories, such as brushes, chockes, keys, and so on.

  MODEL 400/UM04

  MEASURES - DESCRIPTION


This motor-case is fully covered with Suprema leather and features a clean and elegant shape.
The corners are carefully handstitched by a waxed yellow thread.
The soft leather handle allows a comfortable carry. The three digit combination lock and the fittings are solid brass, and allow a safe and quick fastening. Two leather straps complete the external part and ensures the safe closure of the case.

The interior is finely lined with velvet.
There are compartments for stock (hold by a leather strap), over-and-under or side-by-side barrels up to 77 cm (there’s a reducer for 72 cm barrels), cleaning rods.
There’s also a handy compartment with lid, to fit small accessories, such as brushes, chockes, keys, and so on.

Colours available: tan leather with burgundy velvet; redish brown leather with green velvet.

  MODEL 408/UM04

  MEASURES - DESCRIPTION

This motor case is made of selected genuine full grain Premium leather.
Built on a superior construction hardwood frame, this case features an obsessive attention to detail and a classic timeless style. Each shell is carefully hand finished and prepared to hand-sew through the wood (with waxed thread) the corner pieces, the loops and the handle attachments. The soft leather handle allows a comfortable carry. All the fittings are solid brass, with satin finish, and the classic key lock is under the handle.
Two leather straps ensure a safe fastening of the case.

The interior is finely lined with genuine baize felt, with compartments for stock, barrels of side-by-side or over-and-under (up to 77 cm, but with reducer for 72 cm barrels), cleaning rods. There’s also a handy compartment with lid, to store other accessories, such as screwdrivers, rod brushes and so on.
Colours available: tan leather with burgundy baize; redish brown leather with green baize; dark brown leather with burgundy baize.

Available also for shotgun with 72 cm barrels, Mod. 408/UM01.