Emmebi
gun cases for side-by-side and over-and-under (two guns)
Gun Cases for Shotguns
Universal: for Side-by-side and Over-and-Under        Two guns
These cases fit almost all combinations of pairs of side-by-side, over-and-under and semi-auto shotguns, with following features:
12ga (we can supply also adapters or cases for other calibers);
english and pistol grip, total max. length 54 cm;
barrels from 72 to 77 cm. All cases are supplied with a 5 cm removable spacer block, to accommodate shorter barrels, and come with an extra piece of lining to make small blocks for the exact fit.
Guns and accessories shown in the cases are not included. On request we can manufacture cases with special sizes and special configurations inside.
  MODEL AG/D76

  MEASURES - DESCRIPTION


This compact case is designed for transportation of shotguns in critical conditions, when an additional protection is required. It’s completely covered of bush-hammered aluminium, joined to a plywood panel (for the best ratio between lightness, sturdiness and elasticity), fitted with iron corners and fittings, as well as resistant key locks. The interior is made of with a gun-shaped grey foam-rubber, to take two side-by-side or over-and-under, up to 77 cm guaranteeing a good protection. A gun is fitted in the lid and another one in the bottom, with a flip divider. Accessory compartments. Ideal for travelling by air.

  MODEL AG/D79

  MEASURES - DESCRIPTION


This compact case is designed for transportation of shotguns in critical conditions, when an additional protection is required. It’s completely covered of bush-hammered aluminium, joined to a plywood panel (for the best ratio between lightness, sturdiness and elasticity), fitted with iron corners and fittings, as well as resistant key locks. The interior is made of with a gun-shaped grey foam-rubber, to take a side-by-side or over-and-under and a semi-automatic shotgun, with barrels up to 77 cm guaranteeing a good protection. A gun is fitted in the lid and another one in the bottom, with a flip divider. Accessory compartments. Ideal for travelling by air.

  MODEL AG/D80

  MEASURES - DESCRIPTION


This compact case is designed for transportation of shotguns in critical conditions, when an additional protection is required. It’s completely covered of bush-hammered aluminium, joined to a plywood panel (for the best ratio between lightness, sturdiness and elasticity), fitted with iron corners and fittings, as well as resistant key locks. The interior is made of with a gun-shaped grey foam-rubber, to take two semi-automatic shotguns, with barrels up to 85 cm guaranteeing a good protection. A gun is fitted in the lid and another one in the bottom, with a flip divider. Accessory compartments. Ideal for travelling by air.

  MODEL 365/UG04

  MEASURES - DESCRIPTION


This traditional case is built on a solid hardwood frame, covered with heavy duty green Panama canvas. The corners and the loops are made of full grain Premium leather, and are carefully hand stitched to the frame by a waxed yellow thread. The ergonomic handle is made of leather and is fixed to the case by traditional solid brass rings. The solid brass key lock is right under the handle, and together with the two leather straps ensure a safe fastening of the case. The interior is finely lined with genuine baize green felt. There are compartments for two stocks (hold by a leather strap), two pairs of over-and-under or side-by-side barrels up to 77 cm (there’s a reducer for 72 cm barrels), snap caps, oil bottle, cleaning rods. There’s also a handy compartment with lid, to fit small accessories, such as brushes, chockes, keys, and so on.

  MODEL 400/UG04

  MEASURES - DESCRIPTION


This case is fully covered with Suprema leather and features a clean and elegant shape. The corners are carefully handstitched by a waxed yellow thread. The soft leather handle allows a comfortable carry. The three digit combination locks and the fittings are solid brass, and allow a safe and quick fastening. A leather strap complete the external part and ensures the safe closure of the case. The interior is finely lined with velvet, properly fitted to take in their compartments two stocks, two pairs of barrels of side-by-side or over-and-under (up to 77 cm, but with reducer for 72 cm barrels). There are also compartments for snap caps, oil bottle, cleaning rods. There is also a handy compartment with lid, to fit brushes, chockes, accessories, and so on. Colours available: tan leather with burgundy velvet; redish brown leather with green velvet.

  MODEL 407/UG04

  MEASURES - DESCRIPTION


This classic gun case is made of selected genuine Suprema leather. Built on a hardwood frame, this case features attention to detail and a classic timeless style. Each shell is carefully hand finished and prepared to hand-sew through the wood (with waxed thread) the corner pieces. The soft leather handle allows a comfortable carry. All the fittings are solid brass, with satin finish, and the combination lock is under the handle. Two leather straps ensure a safe fastening of the case. The interior is finely lined with velvet, properly fitted to take in their compartments two stocks, two pairs of barrels of side-by-side or over-and-under (up to 77 cm, but with reducer for 72 cm barrels). There are also compartments for snap caps, oil bottle, cleaning rods. There is also a handy compartment with lid, to fit brushes, chockes, accessories, and so on. Colours available: tan leather with burgundy velvet; redish brown leather with green velvet.

  MODEL 408/UG04

  MEASURES - DESCRIPTION


This classic gun case is made of selected genuine full grain Premium leather. Built on a superior construction hardwood frame, this case features an obsessive attention to detail and a classic, timeless style. Each shell is carefully hand finished and prepared to hand-sew through the wood (with waxed thread) the corner pieces, the loops and the handle attachments. The soft leather handle allows a comfortable carry. All the fittings are solid brass, with satin finish, also the two classic key locks. Two leather straps ensure a safe fastening of the case. The interior is finely lined with genuine baize felt, with compartments for two stocks, two pairs of barrels of side-by-side or over-and-under (up to 77 cm, but with reducer for 72 cm barrels), snap caps, oil bottle, cleaning rods, There’s also a handy compartment with lid, to store other accessories, such as screwdrivers, rod brushes and so on. This case is a proper way to carry a fine gun, but it is also an excellent way to display it: if fitted with the classic gun accessories, it enhances the gun to a high level. Colours available: tan leather with burgundy baize; redish brown leather with green baize; dark brown leather with burgundy baize.

Available also for shotguns with 72 cm barrels, mod 408/UG01B
  MODEL 450/UG04

  MEASURES - DESCRIPTION


This classic gun case is made of a unique mix of suede Alce leather and Suprema calfskin leather. Built on a superior construction hardwood frame, this case features attention to detail and a classic timeless style. Each shell is carefully hand finished and prepared to hand-sew through the wood (with waxed thread) the corner pieces. The soft leather handle allows a comfortable carry. All the fittings are solid brass, with satin finish, and the three digit combination lock is under the handle. Two leather straps ensure a safe fastening of the case. The interior is finely lined with velvet, with compartments for two stocks, two pair of barrels (side-by-side or over-and-under) up to 77 cm (a reducer for 72 cm barrels is supplied), snap caps, oil bottle, cleaning rods. There’s also a handy compartment with lid, to store other accessories, such as screwdrivers, rod brushes and so on. This case is a proper way to carry a fine gun, but it is also an excellent way to display it: if fitted with the classic gun accessories, it enhances the gun to a high level. Colours available: ligth brown leather with green velvet; dark brown leather with green velvet.

  MODEL 1000/UG01

  MEASURES - DESCRIPTION


This case is designed to carry and display the very best guns. Built on a superior construction, seasoned oak frame, each shell is carefully hand finished and then it is covered with a full grain cowhide Premium leather. It features an obsessive attention to detail and a classic, timeless style. Key locks, corners, handle attachments are solid brass with glossy finishing. The soft leather handle allows a comfortable carry. Two strong leather straps ensure a safe fastening of the case. The interior is finely lined with genuine baize felt, with compartments for two stocks, two pair of barrels of side-by-side or over-and-under up to 72 cm (a reducer for 67 cm barrels is supplied), snap caps, oil bottle, cleaning rods. There’s also a handy compartment with lid, to store other accessories, such as screwdrivers, rod brushes and so on. This case is a proper way to carry a fine gun, but it is also an excellent way to display it: if fitted with the classic gun accessories, it enhances the gun to a high level. It comes with a very heavy canvas cover with leather corners and piping, to protect the case during transit. Colours available: tan leather with burgundy baize; redish brown leather with green baize; dark brown leather with burgundy baize.

Available also for shotguns with 77 cm barrels, Mod. 1000/UG04C

  MODEL 1003/UG04

  MEASURES - DESCRIPTION


This case is designed to carry and display the very best guns. Built on a superior construction, seasoned oak frame, each shell is carefully hand finished and then it is covered with a full grain cowhide Premium leather. It features an obsessive attention to details and a classic, timeless style. Key locks, corners, handle attachments are solid brass with glossy finishing. The soft leather handle allows a comfortable carry. Two strong leather straps ensure a safe fastening of the case during transit. The interior is made of oak wood as well, and finely lined with genuine baize felt, with compartments for two stocks, two pair of barrels of side-by-side or over-and-under up to 77 cm (a reducer for 72 cm barrels is supplied), snap caps, oil bottle, cleaning rods. There’s also a handy compartment with lid, to store other accessories, such as Gunsmith's screwdrivers, rod brushes and so on. This case is a proper way to carry a fine gun, but it is also an excellent way to display it: if fitted with the classic gun accessories, it enhances the gun to a high level. It comes with a very heavy canvas cover with leather corners and piping, to protect the case during transit. Colours available: tan leather with blue baize; redish brown leather with blue baize; dark brown leather with blue baize.

Available also for shotguns with 72 cm barrels, Mod. 1003/UG01D.
  MODEL AG/MGEM

  MEASURES - DESCRIPTION


This compact motor-case is designed for transportation of shotguns in critical conditions, when an additional protection is required. It is completely covered of bush-hammered aluminium, joined to a plywood panel (for the best ratio between lightness, sturdiness and elasticity), assembled with iron corners and fittings, as well as resistant key locks and hinges. The interior is finely lined with black velvet. There are compartments for two guns (side-by-side or over-and-under) with barrels length up to 77 cm (a reducer for 72 cm is supplied with the case), and accessories. Ideal for travelling by air.

  MODEL 365/UMG04

  MEASURES - DESCRIPTION


This traditional motor-case is built on a hardwood frame, covered with heavy duty green Panama canvas. The corners and the loops are made of full grain Premium leather, and are carefully hand stitched to the frame by a waxed yellow thread. The ergonomic handle is made of leather and is fixed to the case by traditional solid brass rings. The solid brass key lock is in the middle, and together with the two leather straps ensure a safe fastening of the case. The interior is finely lined with genuine baize green felt. There are compartments for two stocks (hold by a leather strap), two pairs of over-and-under or side-by-side barrels up to 77 cm (there’s a reducer for 72 cm barrels). There’s also a handy compartment with lid, to fit small accessories, such as brushes, chockes, keys, and so on.

  MODEL 408/UMG04

  MEASURES - DESCRIPTION


This motor case is made of selected genuine full grain Premium leather. Built on a superior construction hardwood frame, this case features an obsessive attention to detail and a classic timeless style. Each shell is carefully hand finished and prepared to hand-sew through the wood (with waxed thread) the corner pieces, the loops and the handle attachments. The soft leather handle allows a comfortable carry. All the fittings are solid brass, with satin finish, also the classic key lock. Two leather straps ensure a safe fastening of the case. The interior is finely lined with genuine baize felt, with compartments for two stocks, two pairs of barrels of side-by-side or over-and-under (up to 77 cm, but with reducer for 72 cm barrels). There’s also a handy compartment with lid, to store other accessories, such as screwdrivers, rod brushes and so on. Colours available: tan leather with burgundy baize; redish brown leather with green baize; dark brown leather with burgundy baize.

Available also for shotguns with 72 cm barrels, Mod. 408/UMG01B.
  MODEL 400/UD04

  MEASURES - DESCRIPTION


This case is fully covered with Suprema leather and features a clean and elegant shape. The corners are carefully handstitched by a waxed yellow thread. Two soft leather handles allows a comfortable carry. The three digit combination locks and the fittings are solid brass, and allow a safe and quick fastening. A leather strap complete the external part and ensures the safe closure of the case. The interior is finely lined with velvet, properly fitted to take in their compartments two stocks, two pairs of barrels of side-by-side or over-and-under (up to 77 cm, but with reducer for 72 cm barrels). A gun is fitted in the lid and another one in the bottom, with a flip divider. There are also compartments for snap caps, oil bottle, cleaning rods. There is also a handy compartment with lid, to fit brushes, chockes, accessories, and so on. Colours available: tan leather with burgundy velvet; redish brown leather with green velvet.

  MODEL 408/UD04

  MEASURES - DESCRIPTION


This classic gun case is made of selected genuine full grain Premium leather. Built on a superior construction hardwood frame, this case features an obsessive attention to detail and a classic, timeless style. Each shell is carefully hand finished and prepared to hand-sew through the wood (with waxed thread) the corner pieces, the loops and the handle attachments. Two soft leather handles allows a comfortable carry. All the fittings are solid brass, with satin finish, also the classic key locks. Two leather straps ensure a safe fastening of the case. The interior is finely lined with baize felt, properly fitted to take in their compartments two stocks, two pairs of barrels of side-by-side or over-and-under (up to 77 cm, but with reducer for 72 cm barrels). A gun is fitted in the lid and another one in the bottom, with a flip divider. There are also compartments for snap caps, oil bottle, cleaning rods. There is also a handy compartment with lid, to fit brushes, chockes, accessories, and so on. Colours available: tan leather with burgundy baize; redish brown leather with green baize; dark brown leather with burgundy baize.