Emmebi
Gun cases for bolt action rifles with scope
Gun Cases for Rifled Guns
For Rifle                                                Full-length rifle
These cases fit full length rifles, with or without scope, with total length of 116-123 cm, depending on the case. The cases feature reinforced hardwood frames, and if lined with baize or velvet are supplied with an extra piece of lining to make if necessary small blocks for the exact fit (we can supply also special material to make reducer/adapter blocks). On request we can manufacture cases with special sizes and special configurations inside.
  MODEL AG/C

  MEASURES - DESCRIPTION


This case is designed for transportation of full length rifles in critical conditions, when an additional protection is required. Itís completely covered of bush-hammered aluminium, joined to a plywood panel (for the best ratio between lightness, sturdiness and elasticity), fitted with iron corners and fittings, as well as resistant key locks. The interior is padded with a egg-shaped foam rubber to take a rifle without scope. Inside dimensions 123x15,5x8 cm. Ideal for travelling by air.

  MODEL AG/123

  MEASURES - DESCRIPTION


This case is designed for transportation of full length rifles in critical conditions, when an additional protection is required. Itís completely covered of bush-hammered aluminium, joined to a plywood panel (for the best ratio between lightness, sturdiness and elasticity), fitted with iron corners and fittings, as well as resistant key locks. The interior is padded with a egg-shaped foam rubber to take a rifle with mounted scope. Inside dimensions 123x23x8 cm. Ideal for travelling by air.

  MODEL AG/124

  MEASURES - DESCRIPTION


This case is designed for transportation of full length rifles in critical conditions, when an additional protection is required. Itís completely covered of bush-hammered aluminium, joined to a plywood panel (for the best ratio between lightness, sturdiness and elasticity), fitted with iron corners and fittings, as well as resistant key locks. The interior is padded with a gun-shaped grey foam-rubber, guaranteeing a good protection and allowing you to fit rifle (max length 116 cm) with mounted scope, with their accessories. Ideal for travelling by air.

  MODEL 355/C01

  MEASURES - DESCRIPTION


This case is covered with green Spalmato - the natural evolution of the leatherette Ė it is a waterproof tear-resistance fabric, featuring a soft touch as well as a nice look. The case has reinforced edges with reddish brown leatherette and a soft handle to carry it comfortably. The 3 digit combination locks are made of brass and two leather straps ensure a quick and safe fastening. The interior is finely lined with green velvet, properly fitted to take a rifle (max length 118 cm) with mounted scope. The lid and stock compartment have protective foam-rubber padding, for a better protection of your gun. There are also compartments for scope, cleaning rods. There is also a handy compartment with lid, to fit brushes, chockes, accessories, and so on.

  MODEL 365/CL01

  MEASURES - DESCRIPTION


This traditional case is built on a solid hardwood frame, covered with heavy duty green Panama canvas. The corners and the loops are made of full grain Premium leather, and are carefully hand stitched to the frame by a waxed yellow thread. The ergonomic handle is made of leather and is fixed to the case by traditional solid brass rings. The solid brass key lock is right under the handle, and together with the two leather straps ensure a safe fastening of the case. The interior is finely lined with genuine baize green felt, properly fitted to take a rifle (max length 118 cm) with mounted scope. The lid and stock compartment have protective foam-rubber padding, for a better protection of your gun. There are also compartments for scope, cleaning rods. There is also a handy compartment with lid, to fit brushes, chockes, accessories, and so on.

  MODEL 400/C01

  MEASURES - DESCRIPTION


This case is fully covered with Suprema leather and features a clean and elegant shape. The corners are carefully handstitched by a waxed yellow thread. The soft leather handle allows a comfortable carry. The three digit combination locks and the fittings are solid brass, and allow a safe and quick fastening. Two leather straps complete the external part and ensures the safe closure of the case. The interior is finely lined with velvet, properly fitted to take a rifle (max length 118 cm) with mounted scope. The lid and stock compartment have protective foam-rubber padding, for a better protection of your gun. There are also compartments for scope, cleaning rods. There is also a handy compartment with lid, to fit brushes, chockes, accessories, and so on. Colours available: tan leather with burgundy velvet; redish brown leather with green velvet.

  MODEL 407/C01

  MEASURES - DESCRIPTION


This classic gun case is made of selected genuine Suprema leather. Built on a hardwood frame, this case features attention to detail and a classic timeless style. Each shell is carefully hand finished and prepared to hand-sew through the wood (with waxed thread) the corner pieces. The soft leather handle allows a comfortable carry. All the fittings are solid brass, with satin finish, and the combination lock is under the handle. Two leather straps ensure a safe fastening of the case. The interior is finely lined with velvet, properly fitted to take a rifle (max length 118 cm) with mounted scope. The lid and stock compartment have protective foam-rubber padding, for a better protection of your gun. There are also compartments for scope, cleaning rods. There is also a handy compartment with lid, to fit brushes, chockes, accessories, and so on. Colours available: tan leather with burgundy velvet; redish brown leather with green velvet; dark brown leather with green velvet.

  MODEL 408/CL01

  MEASURES - DESCRIPTION


This classic gun case is made of selected genuine full grain Premium leather. Built on a superior construction hardwood frame, this case features an obsessive attention to detail and a classic, timeless style. Each shell is carefully hand finished and prepared to hand-sew through the wood (with waxed thread) the corner pieces, the loops and the handle attachments. The soft leather handle allows a comfortable carry. All the fittings are solid brass, with satin finish, and the classic key lock is under the handle. Two leather straps ensure a safe fastening of the case. The interior is finely lined with genuine baize felt, properly fitted to take a rifle (max length 118 cm) with mounted scope. The lid and stock compartment have protective foam-rubber padding, for a better protection of your gun. There are also compartments for scope, cleaning rods. There is also a handy compartment with lid, to fit brushes, chockes, accessories, and so on. Colours available: tan leather with burgundy baize; redish brown leather with green baize; dark brown leather with burgundy baize.

  MODEL 450/C01

  MEASURES - DESCRIPTION


This classic gun case is made of a unique mix of suede Alce leather and Suprema calfskin leather. Built on a superior construction hardwood frame, this case features attention to detail and a classic timeless style. Each shell is carefully hand finished and prepared to hand-sew through the wood (with waxed thread) the corner pieces. The soft leather handle allows a comfortable carry. All the fittings are solid brass, with satin finish, and the three digit combination lock is under the handle. Two leather straps ensure a safe fastening of the case. The interior is finely lined with velvet, properly fitted to take a rifle (max length 118 cm) with mounted scope. The lid and stock compartment have protective foam-rubber padding, for a better protection of your gun. There are also compartments for scope, cleaning rods. There is also a handy compartment with lid, to fit brushes, chockes, accessories, and so on. Colours available: ligth brown leather with green velvet; dark brown leather with green velvet.

  MODEL 1000/CL01

  MEASURES - DESCRIPTION


This case is designed to carry and display the very best guns. Built on a superior construction, seasoned oak frame, each shell is carefully hand finished and then it is covered with a full grain cowhide Premium leather. It features an obsessive attention to detail and a classic, timeless style. Key locks, corners, handle attachments are solid brass with glossy finishing. The soft leather handle allows a comfortable carry. Two strong leather straps ensure a safe fastening of the case. The interior is finely lined with genuine baize felt, properly fitted to take a rifle (max length 118 cm) with mounted scope. The lid and stock compartment have protective foam-rubber padding, for a better protection of your gun. There are also compartments for scope, cleaning rods. There is also a handy compartment with lid, to fit brushes, chockes, accessories, and so on. This case is a proper way to carry a fine gun, but it is also an excellent way to display it: if fitted with the classic gun accessories, it enhances the gun to a high level. It comes with a very heavy canvas cover with leather corners and piping, to protect the case during transit. Colours available: tan leather with burgundy baize; redish brown leather with green baize; dark brown leather with burgundy baize

  MODEL 1003/C01

  MEASURES - DESCRIPTION


This case is designed to carry and display the very best guns. Built on a superior construction, seasoned oak frame, each shell is carefully hand finished and then it is covered with a full grain cowhide Premium leather. It features an obsessive attention to details and a classic, timeless style. Key locks, corners, handle attachments are solid brass with glossy finishing. The soft leather handle allows a comfortable carry. Two strong leather straps ensure a safe fastening of the case during transit. The interior is finely lined with genuine baize felt, properly fitted to take a rifle (max length 118 cm) with mounted scope. The lid and stock compartment have protective foam-rubber padding, for a better protection of your gun. There are also compartments for scope, cleaning rods. There is also a handy compartment with lid, to fit brushes, chockes, accessories, and so on. This case is a proper way to carry a fine gun, but it is also an excellent way to display it: if fitted with the classic gun accessories, it enhances the gun to a high level. It comes with a very heavy canvas cover with leather corners and piping, to protect the case during transit. Colours available: tan leather with blue baize; redish brown leather with blue baize; dark brown leather with blue baize.
  MODEL AG/2

  MEASURES - DESCRIPTION


This case is designed for transportation of full length rifles in critical conditions, when an additional protection is required. Itís completely covered of bush-hammered aluminium, joined to a plywood panel (for the best ratio between lightness, sturdiness and elasticity), fitted with iron corners and fittings, as well as resistant key locks. The interior is padded with a egg-shaped foam rubber to take two rifles (max length 118 cm). Inside dimensions 123x33x8 cm. Ideal for travelling by air.















EXTRA: on request we can fit two wheels and a side handle to carry the case comfortably during transit.